Motorola ASTRO SRX 2200 Series User Manual Download Page 6

Page: 6 / 112

Pairing with Low Frequency-

Motorola Proximity Pairing (LF-
MPP) Feature................................ 69

Radio Indications of Lost Bluetooth

Connection.....................................70

Standard Pairing Feature....................71
Turning On the Bluetooth Audio

(Routing the Audio from the
Radio to the Headset).................... 73

Turning Off the Bluetooth Audio

(Routing the Audio from the
Headset to the Radio).................... 73

Adjusting the Volume of the Radio

from Bluetooth Audio Device......... 73

Clearing All Bluetooth Devices

Information..................................... 73

Over-the-Air Programming (POP 25,

ASTRO 25, ASTRO Conventional)...........74

Responding to the Notification of

Upgrade......................................... 74

Voice Announcement.................................... 74
Site Selectable Alerts (ASTRO 25)................75
Wi-Fi.............................................................. 76

Turning Wi-Fi On or Off.......................76
Checking the Wi-Fi Configuration

and Status of the Radio................. 76

Utilities........................................................... 77

Using the Flip Display......................... 77
Selecting a Basic Zone Bank.............. 77
Selecting the Power Level.................. 77
Controlling the Display Backlight........ 78
Setting Up the Radio Display and

Visual Indicators to Suit Night
Vision Goggles...............................78

Locking and Unlocking the Controls... 79
Turning Voice Mute On or Off............. 79
Using the Time-Out Timer...................80
Using Conventional Squelch

Operation Features........................ 80

Using the PL Defeat Feature.............. 81
Digital PTT ID Support........................ 81
Smart PTT Feature (Conventional

Only).............................................. 81

Transmit Inhibit................................... 82

Helpful Tips.................................... 84

Radio Care.................................................... 84

Cleaning Your Radio...........................85
Preparation for Washing the Radio

and Parts....................................... 85

Proper Ways to Handle the Radio...... 90
Radio Service and Repair................... 90

Contents

English

Summary of Contents for ASTRO SRX 2200 Series

















































































































Search results

Summary of Contents for ASTRO SRX 2200 Series

Reviews:

Related manuals for ASTRO SRX 2200 Series

Brands by name

Popular brands

Motorola ASTRO SRX 2200 Series, User Manual

Search results

Summary of Contents for ASTRO SRX 2200 Series

Reviews:

Related manuals for ASTRO SRX 2200 Series

Brands by name

Popular brands