Motorola ASTRO SRX 2200 Series User Manual Download Page 36

Page: 36 / 112

Note:
No LED indication when the radio receives a
clear (non-secured) transmission in trunking
Mode. LED indication can be preprogramed by

qualified technician to be permanently
disabled. Consult your dealer for further
details if you want to disable it.

Intelligent Lighting Indicators

This feature temporarily changes the backlight of the top display screen, and adds a color bar to the main display
screen to help signal that a radio event has occurred.

Note:
This feature must be preprogrammed by a qualified radio technician.

Backlight and Bar
Color

Notification

When

Orange

Emergency Alerts

The radio initiates an emergency alarm or call.

The radio receives an emergency alarm or call.

Red

Critical Alerts

The radio battery is low.

The radio is out of range.

The radio enters Failsoft mode.

The radio is unable to establish a full connection with the system.

The radio is unable to authenticate or register with the system.

The radio lost GPS signal or GPS function fails.

Identifying Status Indicators

English

Summary of Contents for ASTRO SRX 2200 Series

















































































































Search results

Summary of Contents for ASTRO SRX 2200 Series

Reviews:

Related manuals for ASTRO SRX 2200 Series

Brands by name

Popular brands

Motorola ASTRO SRX 2200 Series, User Manual

Search results

Summary of Contents for ASTRO SRX 2200 Series

Reviews:

Related manuals for ASTRO SRX 2200 Series

Brands by name

Popular brands