Motorola ASTRO SRX 2200 Series User Manual Download Page 11

Page: 11 / 112

Software Version

All the features described in the following sections are
supported by the software version R14.50.00 or later.

See

Accessing the Radio Information

to determine

the software version of your radio.

Check with your dealer or system administrator for
more details of all the features supported.

Notice to Users (FCC and Industry Canada)

This device complies with Part 15 of the FCC rules
and RSS 210 of the Industry Canada rules per the
following conditions:

•

This device may not cause harmful interference.

•

This device must accept any interference
received, including interference that may cause
undesired operation.

•

Changes or modifications made to this device, not
expressly approved by Motorola, could void the
authority of the user to operate this equipment.

Software Version

English

Summary of Contents for ASTRO SRX 2200 Series

















































































































Search results

Summary of Contents for ASTRO SRX 2200 Series

Reviews:

Related manuals for ASTRO SRX 2200 Series

Brands by name

Popular brands

Motorola ASTRO SRX 2200 Series, User Manual

Search results

Summary of Contents for ASTRO SRX 2200 Series

Reviews:

Related manuals for ASTRO SRX 2200 Series

Brands by name

Popular brands