Motorola ASTRO SRX 2200 Series User Manual Download Page 22

Page: 22 / 112

2 Turn the antenna clockwise to attach to the radio.

3 To remove the antenna, turn the antenna

counterclockwise.

Note:
When removing the antenna, ensure that
the radio is turned off.

Removing and Attaching the Accessory
Connector Cover

The accessory connector is on the antenna side of
the radio. It is used to connect accessories to the
radio.

Note:
To prevent damage to the connector, shield it
with the connector cover when not in use.

1 To remove the accessory connector cover, rotate

the thumbscrew counterclockwise until it
disengages from the radio.

Note:
If the thumbscrew is too tight, use an Allen
wrench at to loosen it first.

Preparing Your Radio for Use

English

Summary of Contents for ASTRO SRX 2200 Series

















































































































Search results

Summary of Contents for ASTRO SRX 2200 Series

Reviews:

Related manuals for ASTRO SRX 2200 Series

Brands by name

Popular brands

Motorola ASTRO SRX 2200 Series, User Manual

Search results

Summary of Contents for ASTRO SRX 2200 Series

Reviews:

Related manuals for ASTRO SRX 2200 Series

Brands by name

Popular brands