Motorola ASTRO SRX 2200 Series User Manual Download Page 54

Page: 54 / 112

4 Release the PTT button to end the transmission

and wait for a response from the dispatcher.

5 To exit Emergency Call, press and hold the

preprogrammed Emergency button for about a
second.

Turning off the radio also cancels the emergency
state.

Sending a Silent Emergency Alarm

This feature allows you to send an Emergency Alarm
to the system without triggering any audio or visual
indicators.

1 Press the preprogrammed Emergency button.

The display shows no changes, the LED does not
light up, and you hear no tones. The silent
emergency state continues until you perform the
next step.

2 Perform one of the following actions:

•

Press and hold the preprogrammed
Emergency button for about a second to exit
the Silent Emergency Alarm mode.

•

Press and release the PTT button to exit the
Silent Emergency Alarm mode and enter
regular dispatch or Emergency Call mode.

Change of Channels during Emergency

For ALL Emergency transmissions, when changing
channels:

•

If the new channel is also preprogrammed for
Emergency, you can change channels while in
Emergency operation. The emergency alarm or
call continues on the new channel.

•

If the new channel is NOT preprogrammed for
Emergency, the display shows

NO EMERG

, and you

hear an invalid tone until you exit the Emergency
state or change to a channel preprogrammed for
Emergency.

Emergency Keep-Alive Feature

This feature, when enabled, prevents the radio from
being turned off via the On/Off Control Knob when
the radio is in the Emergency state.

Note:
The radio only exits the Emergency state
using one of the ways mentioned in the
previous sections.

Advanced Features

English

Summary of Contents for ASTRO SRX 2200 Series

















































































































Search results

Summary of Contents for ASTRO SRX 2200 Series

Reviews:

Related manuals for ASTRO SRX 2200 Series

Brands by name

Popular brands

Motorola ASTRO SRX 2200 Series, User Manual

Search results

Summary of Contents for ASTRO SRX 2200 Series

Reviews:

Related manuals for ASTRO SRX 2200 Series

Brands by name

Popular brands