background image

Use the toothbrush to scrub off any dirt or foreign

matter from the niches of the top catch and thumb
screw.

Rinse the cover under running waer to wash off

the detergent.

Pat dry with a towel.

Proper Ways to Handle the Radio

Do not pound, drop, or throw the radio
unnecessarily. Never carry the radio by the
antenna.

Avoid subjecting the radio to an excess of liquids.
Do not submerge the radio unless it is ruggedized.

Avoid subjecting the radio to corrosives, solvents
or chemicals.

Do not disassemble the radio.

Caution:
Do not use the radio without an accessory
connector or a dust cover in place as
contamination can build up on the contacts.

When charging the radio using a wall mounted
charger, the radio must be turned off. Otherwise,
the Man Down Alert and Emergency may be
accidentally triggered.

Radio Service and Repair

Proper repair and maintenance procedures will
assure efficient operation and long life for this
product. A Motorola maintenance agreement will
provide expert service to keep this and all other
communication equipment in perfect operating
condition. A nationwide service organization is
provided by Motorola to support maintenance
services. Through its maintenance and installation
program, Motorola makes available the finest service
to those desiring reliable, continuous communications
on a contract basis. For a contract service agreement,
please contact your nearest Motorola service or sales
representative, or an authorized Motorola dealer.

Helpful Tips

90

English

Summary of Contents for ASTRO SRX 2200 Series

















































































































Reviews: