Motorola ASTRO APX MOBILE O2 CONTROL HEAD, User Manual

Page: 4 / 142

English
To exit emergency at any time, press and hold the
Emergency button.
Sending an Emergency Call (Trunking Only)
To exit emergency at any time, press and hold the
Emergency button.
Sending a Silent Emergency Alarm
If silent emergency alarm is used with emergency call,
pressing the
PTT button exits the silent mode and
initiates the emergency call.
Display Status Icons
3
Press and hold the emergency button or the PTT
button to return to normal operation.
1
Press Emergency button.
2
A tone sounds and the display alternates
Emergency
and the home display.
OR
A short low-pitched tone sounds when the selected
channel does not support emergency.
3
Press and hold the PTT button. Speak clearly into
the microphone.
4
Release the PTT to end the transmission.
1
Press the preprogrammed Emergency button to
activate the silent alarm feature.
2
The display does not change; the LED does not light
up, and there is no tone.
Receiving a call or data.
Transmitting a call or data.
Received an Individual Call.
u
t
F
The more stripes, the stronger the signal
strength for the current site (trunking only).
Direct radio-to-radio communication or
communication through a repeater.
On = Direct
Off = Repeater
This channel is being monitored.
Voice muting the affiliated trunking talkgroup
or selected channel.
On = Enabled
Off = Disabled
L = Radio is set at Low power.
H = Radio is set at High power.
Scanning a scan list.
Blinking dot = Detects activity on the
Priority-One Channel during
scan.
Steady dot = Detects activity on the Priority-
Two Channel during scan.
Radio is in the view or program mode.
On steady = View mode.
Blinking = Program mode.
V
O
M
K
H
OR
.
i
j
The vote scan feature is enabled.
On = Secure operation.
Off = Clear operation.
Blinking = Receiving an encrypted voice
call.
On = AES Secure operation.
Off = Clear operation.
Blinking = Receiving an encrypted voice
call.
On = Location feature enabled, and location
signal available.
Off = Location feature disabled.
Blinking = Location feature enabled, but
location signal unavailable.
Inverted = User is currently associated with
the radio.
On = Packet data is activated.
Off = Packet data is deactivated.
Blinking = Device registration or user
registration with the server failed
due to an invalid username or
pin.
Data activity is present.
MFK is in Mode Change feature
Turn the MFK to change channel.
MFK is in Volume Change feature
Turn the MFK to adjust the volume.
k
m
l
G
n
o
Menu Navigation
<
or
>
to Menu Entry
(on the keypad mic.).
g
directly below Menu Entry
to select.
H
to exit.
U
or
D
to scroll through sub-list.
g
directly below Menu Entry to select.