Motorola ASTRO APX MOBILE O2 CONTROL HEAD User Manual Download Page 74

Page: 74 / 142

Advanced Features

English

Radio Programmed for Non-Talkback Scan

Procedure:

Press the

PTT

button at any time to transmit on the selected

channel or fixed channel.

To make a Call Alert page, or Private Conversation call while
scanning, press either the

Menu Select

button directly below

Page

Call

. The call is entered on the selected channel and

scanning is halted until the call is exited by pressing

pressing the

Menu Select

button below either

Page

Call

Deleting a Nuisance Channel

If a channel continually generates unwanted calls or noise
(termed a “nuisance” channel), you can temporarily remove the
unwanted channel from the scan list.

This capability does not apply to priority channels or the
designated transmit channel.

Procedure:

When the radio is locked onto the channel to be deleted,

(on the keypad mic.) to

Nuis

Press the

Menu Select

button directly below

Nuis

Restoring a Nuisance Channel

Procedure:

To restore the deleted nuisance channel, do

one

of the

following:

• Turn scan off, then on.

• Change modes.

• Turn off the radio, and then turn it back on.

Nuisance mode delete can be disabled by the system
administrator.

Summary of Contents for ASTRO APX MOBILE O2 CONTROL HEAD















































































































































Search results

Summary of Contents for ASTRO APX MOBILE O2 CONTROL HEAD

Reviews:

Related manuals for ASTRO APX MOBILE O2 CONTROL HEAD

Brands by name

Popular brands

Motorola ASTRO APX MOBILE O2 CONTROL HEAD, User Manual

Search results

Summary of Contents for ASTRO APX MOBILE O2 CONTROL HEAD

Reviews:

Related manuals for ASTRO APX MOBILE O2 CONTROL HEAD

Brands by name

Popular brands