Motorola ASTRO APX MOBILE O2 CONTROL HEAD User Manual Download Page 39

Page: 39 / 142

Identifying S

tatus Indicators

English

Text Messaging Service (TMS) Icons

This feature allows you to send and receive text messages. See

Text Messaging Service (TMS)

on page 67 for more

information.

Status Icons

The following icons appear on the radio’s display for TMS

features:

Inbox Full

The Inbox is full.

Message Sent

The text message is sent successfully.

Message Unsent

The text message cannot be sent.

Unread Message

•

User receives a new message.

•

The selected text message in the Inbox has
not been read.

[
Z

Read Message

The selected text message in the Inbox has been
read.

3/6

Message Index

Indicates the index of the current message the
user is viewing.

Example: If the user is looking at the third
message out of a total of 6 messages in the
Inbox folder, the icon is displayed as the icon on
the left column.

Priority Status

•

The “Priority” feature is toggled on before the
message is sent.

•

Messages in the Inbox folder are flagged with
“Priority”.

Request Reply

•

The “Request Reply” feature is toggled on
before the message is sent.

•

Messages in the Inbox folder are flagged with
“Request Reply”.

]

;

Summary of Contents for ASTRO APX MOBILE O2 CONTROL HEAD















































































































































Search results

Summary of Contents for ASTRO APX MOBILE O2 CONTROL HEAD

Reviews:

Related manuals for ASTRO APX MOBILE O2 CONTROL HEAD

Brands by name

Popular brands

Motorola ASTRO APX MOBILE O2 CONTROL HEAD, User Manual

Search results

Summary of Contents for ASTRO APX MOBILE O2 CONTROL HEAD

Reviews:

Related manuals for ASTRO APX MOBILE O2 CONTROL HEAD

Brands by name

Popular brands