English
m
ASTRO
®
APX™
O2 Control Head Mobile Radio
Quick Reference Card
RF Energy Exposure and Product Safety Guide for
Mobile Two-way Radios
ATTENTION!
This radio is restricted to occupational use only to satisfy FCC RF
energy exposure requirements. Before using this product, read
the guide enclosed with your radio which contains important
operating instructions for safe usage and RF energy awareness
and control for compliance with applicable standards and
regulations.
Radio Controls
Radio On/Off
Adjusting Volume
Selecting a Zone
Selecting a Channel
Receiving and Transmitting
Sending an Emergency Alarm
Before using this product, read the operating
instructions for safe usage contained in the Product
Safety and RF Exposure booklet enclosed with your
radio.
!
C a u t i o n
Power Button
LED Indicators
Emergency
Button*
Multi-function Knob
(MFK)*
Home Button
Menu Select Buttons*
Accessory Port (Microphone)
*These controls/buttons are programmable.
Dimmer Button
Up & Down
Buttons*
Press the
Power
button to turn the radio on or off.
If volume is set as the primary mode,
1
Turn the
MFK
clockwise to increase volume or
counterclockwise to decrease the volume.
If volume is not set as the primary mode, press the
MFK
once and repeat step 1.
If zone is set as the primary mode,
1
Turn the
MFK
until the display shows the desired
zone and press the
PTT
button to begin transmitting
on the displayed zone.
If zone is not set as the primary mode, press the
MFK
once and repeat step 1.
OR
2
>
or
<
(on the keypad mic.) to scroll to
Zone.
3
Press the
Menu Select
button directly below
Zone
.
4
Rotate the
MFK
or
D
or
U
to the desired zone.
5
Press the
Menu Select
button directly below
Sel
or
the
3
button (on the keypad mic.) to confirm the
selected zone number.
6
Press the
PTT
button to begin transmitting on the
displayed zone.
If channel is set as the primary mode,
1
Turn the
MFK
until the display shows the desired
channel and press the
PTT
button to begin
transmitting on the displayed channel.
If channel is not set as the primary mode, press the
MFK
once and repeat step 1.
OR
2
>
or
<
(on the keypad mic.) to scroll to
Chan.
3
Press the
Menu Select
button directly below
Chan
.
4
Rotate the
MFK
or press
D
or
U
to the desired
channel.
5
Press the
Menu Select
button directly below
Sel
or
the
3
button (on the keypad mic.) to confirm the
channel.
6
Press the
PTT
button to transmit on the displayed
channel.
1
Take the microphone off the hook.
2
Select zone/channel.
3
Listen for a transmission.
OR
>
or
<
(on the keypad mic.) to
Mon
then press the
Menu Select
button directly below
Mon
and listen for
activity.
4
Adjust volume, if necessary.
5
Press the
PTT
button to transmit; release to receive.
1
Press the
Emergency
button. A tone sounds and the
display alternates
Emergency
and the home display.
2
A dispatcher acknowledgment
Ack received
display
follows.
AND, Trunking Only:
A high-pitched tone indicates that the alarm has been
received by the trunked system’s central controller.
*PMLN6193B*
PMLN6193B
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M logo are trademarks or registered trademarks of Motorola
Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners.
© 2012 by Motorola Solutions, Inc. All Rights Reserved. 10/12
1303 East Algonquin Road, Schaumburg, Illinois 60196, U.S.A.
Summary of Contents for ASTRO APX MOBILE O2 CONTROL HEAD
