Motorola ASTRO APX MOBILE O2 CONTROL HEAD User Manual Download Page 22

Page: 22 / 142

Prep

aring Y

ur Radio for Use

English

Turning On the Radio

Press the

Power

Button

briefly

turn on the radio.

After a short time, the red,
yellow and green LEDs light up.
The display then shows Zone
and channel text, and menu
items display on the screen.

The backlight will turn on to the
last selected dim level.

Note:

Pressing the

Power

Button

before the LED lights up

will be ignored.

Fail ##/##

appears in the display, the radio will not

function until the condition has been corrected.

Error ##/##

appears, some non-critical data has

been changed. If either of these displays appear, if the
display goes blank, or if the unit appears to be locked
up, see

Helpful Tips

on page 109 for more

information.

If the power-up test is unsuccessful, you see

Error

XX/YY

(

XX/YY

is an alphanumeric code).

Turn off the radio, check the battery, and turn the radio
back on. If the radio fails the power-up test again,

record the

Error XX/YY

code and contact your dealer.

CH Mismatch

appears, means

that either the Control

Head has been connected to an incompatible
transceiver, or vice versa.

If your radio does not power up, contact your dealer.

To turn off the radio, press the

Power Button

after the LEDs

light up.

Validating Compatibility During Power Up

The radio validates and updates the software and hardware of
your control head(s) during power up. Follow the procedure
below when your radio runs this task.

Procedure:

The display shows

Maintenance mode remote device

;

promptly followed by other maintenance statuses.

The display shows

Update done please reset

upon

completion.

The display shows

Update failed please reset

when it

fails to update.

Press the

Power

Button

to reset. The radio runs the usual

power up operation if the software updates are complete.

Power Button

LEDs

Summary of Contents for ASTRO APX MOBILE O2 CONTROL HEAD















































































































































Search results

Summary of Contents for ASTRO APX MOBILE O2 CONTROL HEAD

Reviews:

Related manuals for ASTRO APX MOBILE O2 CONTROL HEAD

Brands by name

Popular brands

Motorola ASTRO APX MOBILE O2 CONTROL HEAD, User Manual

Search results

Summary of Contents for ASTRO APX MOBILE O2 CONTROL HEAD

Reviews:

Related manuals for ASTRO APX MOBILE O2 CONTROL HEAD

Brands by name

Popular brands