Motorola ASTRO APX MOBILE O2 CONTROL HEAD User Manual Download Page 37

Page: 37 / 142

Identifying S

tatus Indicators

English

Status Icons

The liquid crystal display (LCD) of your radio shows the radio
status, text entries, and menu entries.

The following are the icons that appear on the radio’s display.

Receiving

Radio is receiving a call or data.

Transmitting

Radio is transmitting a call or data.

Call Received

Radio has received an Individual Call.

Received Signal Strength Indicator (RSSI)

The number of bars displayed represents the
received signal strength for the current site, for
trunking only. The more stripes in the icon, the
stronger the signal.

Direct

•

= Radio is currently configured for direct

radio-to-radio communication (during
conventional operation only).

•

Off

= Radio is connected with other radios

through a repeater.

Monitor (Carrier Squelch)

Selected channel is being monitored (during
conventional operation only).

In-Call User Alert

•

= The feature is enabled. Voice muting of

the affiliated trunking talkgroup or selected
channel is activated.

•

Off

= The feature is disabled. Voice muting of

the affiliated trunking talkgroup or selected
channel is deactivated.

Power Level

•

= Radio is set at Low power.

•

= Radio is set at High power.

Scan

Radio is scanning a scan list.

Priority Channel Scan

•

Blinking dot

= Radio detects activity on

channel designated as
Priority-One.

•

Steady dot

= Radio detects activity on channel

designated as Priority-Two.

Summary of Contents for ASTRO APX MOBILE O2 CONTROL HEAD















































































































































Search results

Summary of Contents for ASTRO APX MOBILE O2 CONTROL HEAD

Reviews:

Related manuals for ASTRO APX MOBILE O2 CONTROL HEAD

Brands by name

Popular brands

Motorola ASTRO APX MOBILE O2 CONTROL HEAD, User Manual

Search results

Summary of Contents for ASTRO APX MOBILE O2 CONTROL HEAD

Reviews:

Related manuals for ASTRO APX MOBILE O2 CONTROL HEAD

Brands by name

Popular brands