manualshive.com logo in svg

Motorola APX 7000XE MODEL 3, User Manual

The Motorola APX 7000XE MODEL 3 is a cutting-edge communication device designed for professionals in demanding environments. With its rugged construction and advanced features, this radio enables seamless and reliable voice communication. Enhance your experience by accessing the comprehensive user manual for free download from our website, ensuring optimal utilization of this exceptional product.

Share
Download
background image

Note

The radio cannot be used while the
upgrade is being installed. Therefore, make
sure to only accept the upgrade at a
convenient time when immediate radio use
is not required.

• If you choose to delay, a configuration data

upgrade is installed automatically at the next
power up. However, in the case of a firmware
upgrade, the radio prompts 

Upgrade?

 again at the

next power up.

• If you choose to reject, the display shows 

Upg

Aborted

. The radio continues to function with the

current configuration until it gets reprogrammed.

Note

If your radio has problems upgrading over-the-
air, consult a qualified technician for details.

Voice Announcement

This feature enables the radio to audibly indicate the
current feature mode, zone or channel the user has
just assigned. This audio indicator can be customized
per customer requirements. This is typically useful
when the user is in a difficult condition to read the
content shown on the display.

Each voice announcement is within a limit of three
seconds maximum. The sum duration of all different
voice announcements in a radio shall be no more
than 1000 seconds.

Note

This feature must be preprogrammed by a
qualified radio technician.

Check with your agent if Voice Announcement
is available for the feature you need.

The two options of priority for the Voice
Announcement available are:

High

Enables the voice of the feature to announce
even when the radio is receiving calls.

Low

Disables the voice of the feature from
announcing when the radio is receiving calls.

You hear a voice announcement when the features
below are preprogrammed in the radio.

• The radio powers up. The radio announces the

current zone and channel it is transmitting.

• Press the preprogrammed voice announcement

button (which specifically programmed to playback
the current zone and channel). The radio

Advanced Features

154

English

BETA

Summary of Contents for APX 7000XE MODEL 3











































































































































































































Reviews:

No comments

Related manuals for APX 7000XE MODEL 3

Icom IC-706MKIIG Quick Start Manual preview
IC-706MKIIG
Brand: Icom Pages: 15
Audial D88 Instruction Manual preview
D88
Brand: Audial Pages: 23
Cobra UK75 ST Operating Instructions Manual preview
UK75 ST
Brand: Cobra Pages: 19
Ocean Digital WR-26F User Manual preview
WR-26F
Brand: Ocean Digital Pages: 26
Improvements CC Radio-EP Instruction Manual preview
CC Radio-EP
Brand: Improvements Pages: 12
GE 35880 User Manual preview
35880
Brand: GE Pages: 12
D-Link DSB-R100 User Manual preview
DSB-R100
Brand: D-Link Pages: 40
D-Link DSB-R100 Installation Manual preview
DSB-R100
Brand: D-Link Pages: 9
Albrecht AE 2980 User Manual preview
AE 2980
Brand: Albrecht Pages: 16
First Alert SFA1180 User Manual preview
SFA1180
Brand: First Alert Pages: 29
auna Worldwide Mini 10031919 Manual preview
Worldwide Mini 10031919
Brand: auna Pages: 84
RCA BR200 Instruction Manual preview
BR200
Brand: RCA Pages: 32
La Crosse 810-805 Quick Manual preview
810-805
Brand: La Crosse Pages: 2
Team SelCom 4040 Operating Instructions Manual preview
SelCom 4040
Brand: Team Pages: 11
Tchibo 605 193 Instructions For Use Manual preview
605 193
Brand: Tchibo Pages: 24
La Crosse Technology 810-805 Quick Manual preview
810-805
Brand: La Crosse Technology Pages: 2
HAEGER Xplorer FX-30 User Manual preview
Xplorer FX-30
Brand: HAEGER Pages: 53
Cobra microTALK HE130 User Manual preview
microTALK HE130
Brand: Cobra Pages: 2

Brands by name

Popular brands

Load more brands