Note
To exit emergency at any time, press and hold
the preprogrammed Emergency button for
about a second.
The radio operates in the normal dispatch
manner while in Emergency Call, except if
enabled, it returns to one of the following:
Tactical/Non-
Revert
The radio sends
emergency alarm and/or
make emergency call on
the current selected
channel.
Non-Tactical/
Revert for
Conventional
system
The radio reverts to the
preprogrammed
emergency channel to
send alarm and/or make
emergency call.
Non-Tactical/
Revert for
Trunking
system
The radio reverts to the
preprogrammed
emergency talkgroup to
send alarm and/or make
emergency call.
Man Down is an alternate way to activate the
Emergency feature on the condition the Emergency
must be set up for this feature to operate.
See
Man Down
on page 93 for details.
Sending an Emergency Alarm
This feature allows you to send a data transmission,
which identifies the radio sending the emergency, to
the dispatcher.
Note
Emergency button press timer by default is set
to 1 second. This timer is programmable from
0 – 6 seconds by a qualified technician.
Press the preprogrammed
Emergency
button.
One of the following scenarios occurs:
• The display shows
Emergency
on the current
zone and channel. You hear a short medium-
pitched tone and the LED blinks red
momentarily.
• The radio sounds a short low-pitched tone to
indicate that the selected channel does not
support emergency and rejects to launch
emergency mode.
Advanced Features
87
English
BETA
Summary of Contents for APX 7000XE MODEL 3
Page 2: ...BETA ...