Motorola APX 7000XE MODEL 3 User Manual Download

Page: 171 / 202

Turning the Controls and Keypad Buttons Tones On or
Off

You can enable and disable the tones of Navigation
buttons, controls and keypad if needed.

•

Turning the tones on or off via the preprogrammed

Mute

button:

a) To turn the tones off or on, press the

preprogrammed

Mute

button.

•

Turning the tones on or off via the radio menu:
a) or to

Mute

b) Press the

Menu Select

button directly below

Mute

The display shows momentary

Tones off

indicating that the tones are disabled or the
display shows momentary

Tones on

, and you

hear a short tone indicating that the tones are
enabled.

Turning Voice Mute On or Off

You can enable and disable voice transmission, if
needed.

The following methods are options on how to turn
Voice Mute on or off. The result of all the methods is

the same. You can use the options interchangeably
depending on your preference and the programmed
functions.

•

Turning Voice Mute off or on via the
preprogrammed

Voice Mute

button:

a) To turn the feature off or on, press the

preprogrammed

Voice Mute

button.

•

Turning Voice Mute on or off via the radio menu:
a) or to

VMut

b) Press the

Menu Select

button directly below

VMut

The display shows momentary

Voice mute off

, and

you hear a short tone, indicating that the feature is
disabled or the display shows momentary

Voice

mute on

, and you hear a short tone, indicating that

the feature is enabled.

Using the Time-Out Timer

This feature turns off the transmitter of your radio.
You cannot transmit longer than the preset timer
setting.

If you attempt to do so, the radio automatically stops
your transmission, and you hear a talk-prohibit tone.

Advanced Features

167

English

BETA

Summary of Contents for APX 7000XE MODEL 3











































































































































































































Search results

Summary of Contents for APX 7000XE MODEL 3

Reviews:

Related manuals for APX 7000XE MODEL 3

Brands by name

Popular brands

Motorola APX 7000XE MODEL 3, User Manual

Search results

Summary of Contents for APX 7000XE MODEL 3

Reviews:

Related manuals for APX 7000XE MODEL 3

Brands by name

Popular brands