When you receive the dispatcher’s acknowledgment,
the display shows
Ack received
. Four tones sound,
the alarm ends, and the radio exits the Emergency
Alarm mode.
If no acknowledgement is received, the display shows
No acknowledge
. The alarm ends when the timer
expires and the radio exits the Emergency Alarm
mode.
Sending an Emergency Call (Trunking Only)
This feature gives your radio priority access to a
talkgroup.
1
Press the preprogrammed
Emergency
button.
One of the following scenarios occurs:
• The display shows
Emergency
on the current
zone and channel. You hear a short medium-
pitched tone and the LED blinks red
momentarily.
• You hear the radio sounds a short low-pitched
tone to indicate the selected channel does not
support emergency and rejects to launch
emergency mode.
2
Hold the radio vertically 1 to 2 inches (2.5 to 5.0
cm) from your mouth.
3
Press and hold the
PTT
button. Speak clearly into
the microphone.
4
Release the
PTT
button to end the transmission
and wait for a response from the dispatcher.
5
To exit Emergency Call, press and hold the
preprogrammed
Emergency
button for about a
second.
Sending an Emergency Alarm with Emergency Call
This feature gives your radio priority access on a
channel for conventional system, and to a talkgroup
for trunking system.
1
Press the preprogrammed
Emergency
button.
If successful, the display shows
Emergency
on the
current zone and channel. You hear a short,
medium-pitched tone and the LED blinks red
momentarily.
The radio exits Emergency Alarm and enters the
Emergency Call state when one of the following
scenarios occur:
Advanced Features
88
English
BETA
Summary of Contents for APX 7000XE MODEL 3
Page 2: ...BETA ...
