manualshive.com logo in svg

Motorola APX 1000 MODEL 3, User Manual, Page: 97 / 162

Share
Download
Motorola APX 1000 MODEL 3 User Manual Download Page 97

3

 or   to 

No Req Reply

 and press the 

Menu

Select

 button directly below 

Sel

 to remove the

reply status icon.

The display shows the normal message icon on the
label bar.

Receiving a Text Message

Note:

When you receive a message that is flagged
with the “Request Reply” icon, you must
manually respond to the sender that you have
received the message. The system will not
automatically send back a notification that the
radio has received such message.

The following methods are options on how to receive
a text message. The result of all the methods is the
same. You can use the options interchangeably
depending on your preference and the programmed
functions.

•

Receiving a text message via the 

Data Feature

button or the 

TMS Feature

 button:

a) When you receive a message, press and hold

the preprogrammed 

Data Feature

 button or the

TMS Feature

 button to access the Inbox.

The display shows a list of aliases or IDs, with
the sender of the latest received message on
top.

•

Receiving a text message via the radio menu:
a) When the new message icon appears and the

display shows momentary 

New msg

, press the

Menu Select

 button directly below 

TMS

 to

access the Inbox.
The display shows a list of aliases or IDs, with
the sender of the latest received message on
top.

Viewing a Text Message from the Inbox

The Inbox can hold up to thirty (30) messages.

Note:

 or   to read the message if the content

fills more than one screen.

1

Perform one of the following actions:

• Press the preprogrammed 

Data Feature

 button

or the 

TMS Feature

 button to access the TMS

feature screen.   or   to 

Inbox

 and press the

Menu Select

 button below 

Sel

.

Advanced Features

93

English

Summary of Contents for APX 1000 MODEL 3



































































































































































Reviews:

No comments