manualshive.com logo in svg

Motorola APX 1000 MODEL 3, User Manual, Page: 137 / 162

Share
Download
Motorola APX 1000 MODEL 3 User Manual Download Page 137

• Language Pack ID and Version (only when the

language of the display is set to non-English)

Note:

To return to the Home screen, press 

 at any

time.

1

Perform one of the following actions:

• Press the preprogrammed 

Info

 button.

•

 or   to 

Info

 and press the 

Menu Select

button directly below 

Info

.

2

 or   to 

Radio Info

 and press the 

Menu

Select

 button directly below 

Sel

.

The display shows the Information screen.

3

Perform one of the following actions:

•

 or   to scroll through the various

information.

• To return to the previous screen, press the

Menu Select

 button directly below 

Back

.

• Press   to return to the Home screen .

Viewing the IP Information

This feature displays the device name, IP address,
and status of your radio.

Note:

The device name of your radio is
preprogrammed. Check with your dealer or
system administrator for more information.

1

Perform one of the following actions:

• Press the preprogrammed 

Info

 button.

•

 or   to 

Info

 and press the 

Menu Select

button directly below 

Info

.

2

 or   to 

IP Info

 and press the 

Menu Select

button directly below 

Sel

.

The display shows the IP Info screen.

3

Perform one of the following actions:

•

 or   to scroll through the various

information.

• Press the 

Menu Select

 button directly below

Back

 to return to the previous screen.

• Press   to return to the Home screen.

Advanced Features

133

English

Summary of Contents for APX 1000 MODEL 3



































































































































































Reviews:

No comments