Motorola APX 1000 MODEL 3 User Manual Download Page 75

Page: 75 / 162

Select the

Menu Select

button directly below

Yes

to delete the entry, or

to cancel and return to

the main screen of Contacts.
The display shows

<Entry> deleted

and the

radio returns to the main screen of Contacts.

Adding a Contact to a Call List

or to

Cnts

and press the

Menu Select

button

directly below

Cnts

The entries are alphabetically sorted.

or to the entry you want to add and press

the

Menu Select

button directly below

Optn

or to

Add to CallLst

and press the

Menu

Select

button directly below

Sel

Perform one of the following actions:

•

or to the required Call List and press the

Menu Select

button directly below

Add

to add

to the Call List.

•

or to

Cncl

to cancel and return to the

main screen of Contacts.

The display shows momentary

Please wait

before showing

<Entry> added to Call List

confirming the addition of the contact to the list.

The radio returns to the main display of

Contacts

Removing a Contact from a Call List

or to

Cnts

and press the

Menu Select

button

directly below

Cnts

The entries are alphabetically sorted.

or to the entry you want to delete and press

the

Menu Select

button directly below

Optn

or to

Rm frm CallLst

and press the

Menu

Select

button directly below

Sel

The display shows

Remove <Entry> frm Call

List?

Press the

Menu Select

button directly below

Yes

to remove the entry from the Call List, or

cancel and return to the main display of

Contacts

The display shows momentary

Please wait

before showing

<Entry> removed from Call

List

, confirming the removal of the contact from

the list.

Advanced Features

English

Summary of Contents for APX 1000 MODEL 3



































































































































































Search results

Summary of Contents for APX 1000 MODEL 3

Reviews:

Motorola APX 1000 MODEL 3, User Manual, Page: 75 / 162

Search results

Summary of Contents for APX 1000 MODEL 3

Reviews: