manualshive.com logo in svg

Motorola AP-6511, Reference Manual

Introducing the Motorola AP-6511, a cutting-edge wireless access point designed to enhance connectivity. Need assistance setting up or configuring your AP-6511? Look no further than our comprehensive Reference Manual. Download this essential manual for free from manualshive.com, and unlock the full potential of your Motorola AP-6511.

Share
Download
background image

Motorola Solutions AP-6511 Access Point System Reference Guide

 

6-38

4. Configure the following in respect to the WLAN’s intended WMM radio traffic and user requirements:

Wireless Client 
Classification

Use the drop-down menu to select the 

Wireless Client

 Classification for this 

WLAN's intended traffic. The Classification Categories are the different 
WLAN-WMM options available to the radio. The 

Wireless Client

 

Classification types are:

WMM

 – Implies WiFi Multimedia QoS extensions are enabled on this 

radio. This allows different traffic streams between the wireless client and 
the access point to be prioritized according to the type of traffic (voice, 
video etc). The WMM classification is required to support the high 
throughput data rates required of 802.11n device support. 

Voice 

– Optimized for voice traffic. Implies all traffic on this WLAN is 

prioritized as voice traffic on the radio.

Video

 – Optimized for video traffic. Implies all traffic on this WLAN is 

prioritized as video traffic on the radio.

Normal

 – Optimized for best effort traffic. Implies all traffic on this WLAN 

is prioritized as best effort traffic on the radio.

Low

 – Optimized for background traffic. Implies all traffic on this WLAN is 

low priority on the radio.

Enable Voice 
Prioritization

Select this option if Voice traffic is prioritized on the WLAN. This gives 
priority to voice and voice management packets and is supported only on 
certain legacy 

Motorola

 VOIP phones. This feature is enabled by default.

Enable SVP 
Prioritization

Enabling 

Spectralink Voice Prioritization

 (SVP) allows the 

wireless controller

 

to identify and prioritize traffic from Spectralink/Polycomm phones. This 
gives priority to voice, with voice management packets supported only on 
certain legacy Motorola VOIP phones. If the Wireless Client Classification 
is WMM, non WMM devices recognized as voice devices have all their 
traffic transmitted at voice priority. Devices are classified as voice, when 
they emit SIP, SCCP, or H323 traffic. Thus, selecting this option has no 
effect on devices supporting WMM. This feature is enabled by default.

Enable WMM 
Power Save

Enables support for the WMM based power-save mechanism, also known 
as 

Unscheduled Automatic Power Save Delivery

 (U-APSD). This is primarily 

used by voice devices that are WMM capable. The default setting is 
enabled. 

Multicast Mask 
Primary

Displays the primary multicast mask defined for each listed QoS policy. 
Normally all multicast and broadcast packets are buffered until the 
periodic DTIM interval (indicated in the 802.11 beacon frame), when 
clients in power save mode wake to check for frames. However, for certain 
applications and traffic types, the administrator may want the frames 
transmitted immediately, without waiting for the DTIM interval. By 
configuring a primary and secondary multicast mask, an administrator can 
indicate which frames are transmitted immediately. Setting masks is 
optional and only needed if there are traffic types requiring special 
handling.

Summary of Contents for AP-6511



















































































































































































































































































































































































































































Reviews:

No comments

Related manuals for AP-6511

LINOVISION IOT-CPE5G Quick Start Manual preview
IOT-CPE5G
Brand: LINOVISION Pages: 17
Caimore CM520-8AW User Manual preview
CM520-8AW
Brand: Caimore Pages: 83
Sparklan AP12275 M2 User Manual preview
AP12275 M2
Brand: Sparklan Pages: 9
Billion BIPAC-840 Features & Specification preview
BIPAC-840
Brand: Billion Pages: 2
Tenda nova AX3000 EX12 Quick Installation Manual preview
nova AX3000 EX12
Brand: Tenda Pages: 16
Tenda N60 User Manual preview
N60
Brand: Tenda Pages: 72
Tenda A5s User Manual preview
A5s
Brand: Tenda Pages: 92
Minitar MNWAPGR User Manual preview
MNWAPGR
Brand: Minitar Pages: 77
Linksys Instant Wireless WAP54G Quick Installation Manual preview
Instant Wireless WAP54G
Brand: Linksys Pages: 67
HPE AP-345-US Product End-Of-Life Disassembly Instructions preview
AP-345-US
Brand: HPE Pages: 4
TaoTronics TT-BH07 User Manual preview
TT-BH07
Brand: TaoTronics Pages: 35
TallyFi Router Quick Start Manual preview
Router
Brand: TallyFi Pages: 12
Telstra AirCard 760S Getting To Know Your preview
AirCard 760S
Brand: Telstra Pages: 28
H3C WA5320X Installation Manual preview
WA5320X
Brand: H3C Pages: 36
Planex GW-AP54SGX User Manual preview
GW-AP54SGX
Brand: Planex Pages: 25
a-gear P1004T EPON Hardware Installation Manual preview
P1004T EPON
Brand: a-gear Pages: 13
Xirrus XR-520 Quick Installation Manual preview
XR-520
Brand: Xirrus Pages: 20
Zalip CDW531AM User Manual preview
CDW531AM
Brand: Zalip Pages: 64

Brands by name

Popular brands

Load more brands