Motorola AP-6511 Reference Manual Download Page 302

Page: 302 / 434

Motorola Solutions AP-6511 Access Point System Reference Guide

9-26

Figure 9-15

DHCP Class Name Add screen

3. If adding a new

DHCP Class Name

, assign a name representative of the device class supported. The

DHCP user class name should not exceed 32 characters.

4. Select a row within the

Value

column to enter a 32 character maximum value string.

5. Select the

Multiple User Class

radio button to enable multiple option values for the user class. This

allows the user class to transmit multiple option values to DHCP servers supporting multiple user class
options.

6. Select

to save the updates to this DHCP class policy. Select

Reset

to revert the screen back to its last

saved configuration.

Summary of Contents for AP-6511



















































































































































































































































































































































































































































Search results

Summary of Contents for AP-6511

Reviews:

Related manuals for AP-6511

Brands by name

Popular brands

Motorola AP-6511, Reference Manual

Search results

Summary of Contents for AP-6511

Reviews:

Related manuals for AP-6511

Brands by name

Popular brands