manualshive.com logo in svg

Motorola AP-6511, Reference Manual

Share
Download
Motorola AP-6511 Reference Manual Download Page 61

Device Configuration

 

5-9

5. Select 

OK 

to import the defined trustpoint. Select 

Cancel

 to revert the screen to its last saved 

configuration.

6. To optionally import a CA certificate, select the 

Import CA 

button from the Certificate Management 

screen.

The CA signs all digital certificates it issues with its own private key. The corresponding public key is 
contained within the certificate and is called a CA certificate.

Figure 5-5

Certificate Management - Import CA Certificate screen

7. Define the following configuration parameters required for the 

Import

 of the CA certificate:

Hostname

Provide the hostname of the server used to import the trustpoint. This option 
is not valid for 

cf

, 

usb1

, and 

usb2

.

Path

Specify the path to the trustpoint. Enter the complete relative path to the file 
on the server.

Trustpoint Name

Enter the 32 character maximum name assigned to the target trustpoint 
signing the certificate. A trustpoint represents a CA/identity pair containing 
the identity of the CA, CA-specific configuration parameters, and an 
association with an enrolled identity certificate. 

From Network

Select the

 From Network

 radio button to provide network address 

information to the location of the target CA certificate. The number of 
additional fields that populate the screen is also dependent on the selected 
protocol. This is the default setting.

Cut and Paste

Select the

 Cut and Paste

 radio button to copy an existing CA certificate into 

the cut and past field. When pasting a valid CA certificate, no additional 
network address information is required.

Summary of Contents for AP-6511



















































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands