manualshive.com logo in svg

Motorola AP-6511, Reference Manual

Introducing the Motorola AP-6511, a cutting-edge wireless access point designed to enhance connectivity. Need assistance setting up or configuring your AP-6511? Look no further than our comprehensive Reference Manual. Download this essential manual for free from manualshive.com, and unlock the full potential of your Motorola AP-6511.

Share
Download
background image

Motorola Solutions AP-6511 Access Point System Reference Guide

 

7-4

7.1 General Profile Configuration

Each profile requires an AP-6511 unique adoption policy and clock synchronization settings as part of its 
general configuration. Each profile can have an adoption policy and system time.

AP-6511 model Access Points are automatically assigned a default profile unless an AP-6511 Adoption policy 
has been defined that specifically assigns Access Points to a user defined profile. During the general 
configuration process, an AP-6511 adoption policy can be assigned to a specific profile or a new AP-6511 
adoption policy can be created and applied to the profile. Adoption is the process an AP uses to discover 
controllers available in the network, pick the most desirable one, establish an association and optionally 
obtain an image upgrade, obtains its configuration and considers itself provisioned.

Network Time Protocol 

(NTP) manages time and/or network clock synchronization within the network. NTP 

is a client/server implementation. The AP-6511 periodically synchronizes its clock with a master clock (an 
NTP server). For example, the AP-6511 resets its clock to 07:04:59 upon reading a time of 07:04:59 from its 
designated NTP server.

Additionally, if the profile is supporting an Access Point, the profile’s general configuration provides an 
option to disable the device’s LEDs.    

To define a profile’s general configuration:

1. Select the Configuration tab from the Web UI.

2. Select 

Profiles 

from the Configuration tab.

3. Either select 

Add

 if creating a new profile or 

Edit

 if modifying the configuration on an existing profile.

4. Select 

General.

A general configuration screen displays for the new or existing profile.

Figure 7-2

General Profile Configuration screen

5. If creating a new profile, provide a name (up to 32 characters long) within the 

Profile

 parameter field.

6. Set the AP as a

 Controller AP

. A Controller AP mediates the configuration and monitoring of a multiple 

AP deployment. It’s used to adopt other APs and provide a single point of management and control for an 
installation.

Summary of Contents for AP-6511



















































































































































































































































































































































































































































Reviews:

No comments

Related manuals for AP-6511

Caimore CM520-8AW User Manual preview
CM520-8AW
Brand: Caimore Pages: 83
peplink PePLink Surf User Manual preview
PePLink Surf
Brand: peplink Pages: 30
MikroTik cAP lite User Manual preview
cAP lite
Brand: MikroTik Pages: 7
D-Link DAP-3662 Quick Installation Manual preview
DAP-3662
Brand: D-Link Pages: 40
D-Link DAP-3662 User Manual preview
DAP-3662
Brand: D-Link Pages: 94
Huawei E5783-330 Product Description preview
E5783-330
Brand: Huawei Pages: 21
Huawei E5377 Installation Manual preview
E5377
Brand: Huawei Pages: 7
Huawei E5573s-320 Quick Start Manual preview
E5573s-320
Brand: Huawei Pages: 28
Huawei E5786 Quick Start Manual preview
E5786
Brand: Huawei Pages: 36
Huawei E6878-370 Product Description preview
E6878-370
Brand: Huawei Pages: 22
Huawei E6878-870 Operation Manual preview
E6878-870
Brand: Huawei Pages: 8
Huawei E5786s Quick Start Manual preview
E5786s
Brand: Huawei Pages: 24
Huawei E5377 Quick Start Manual preview
E5377
Brand: Huawei Pages: 34
Huawei E5785 Quick Start Manual preview
E5785
Brand: Huawei Pages: 64
Huawei E5377Bs-508 Quick Start Manual preview
E5377Bs-508
Brand: Huawei Pages: 32
Huawei E5573Cs-322 Product Description preview
E5573Cs-322
Brand: Huawei Pages: 20
Huawei E5830s Installation Handbook preview
E5830s
Brand: Huawei Pages: 2
Huawei E5771h-937 Quick Start Manual preview
E5771h-937
Brand: Huawei Pages: 16

Brands by name

Popular brands

Load more brands