manualshive.com logo in svg

Motorola AP-6511, Reference Manual

Introducing the Motorola AP-6511, a cutting-edge wireless access point designed to enhance connectivity. Need assistance setting up or configuring your AP-6511? Look no further than our comprehensive Reference Manual. Download this essential manual for free from manualshive.com, and unlock the full potential of your Motorola AP-6511.

Share
Download
background image

Device Configuration

 

5-29

5.4.1.1 Ethernet Port Override Configuration

Profile Interface Override Configuration

Use an Ethernet Port override to change (modify) parameters of an AP-6511 Ethernet Port configuration.

Displays the physical port name reporting runtime data and statistics. The following ports are available on 
an AP-6511:

• AP6511 - fe1, fe2, fe3, fe4, up1

To define an AP-6511 profile Ethernet port configuration override:

1. Select the 

Configuration

 tab from the Web UI.

2. Select 

Devices

 from the Configuration tab.

3. Select a target device (by double-clinking it) from amongst those displayed within the Device 

Configuration screen. 

Devices can also be selected directly from the Device Browser in the lower, left-hand, side of the UI.

4. Select 

Profile Overrides

 from the Device menu to expand it into sub menu options.

5. Select

 Interface 

to expand its sub menu options.

6. Select 

Ethernet Ports

. 

Figure 5-17

Profile Overrides - Ethernet Port screen

NOTE: 

A blue override icon (to the left of a parameter) defines a parameter as having an 

override applied. To revert the override back to its original profile setting, select the 
override icon to display an 

Action

 pop-up. Select the 

Remove Override 

checkbox to 

revert the override to its original setting for this profile.

Summary of Contents for AP-6511



















































































































































































































































































































































































































































Reviews:

No comments

Related manuals for AP-6511

Qixiang Technology QX310 Installation And Configuration Quick Manual preview
QX310
Brand: Qixiang Technology Pages: 11
Paradyne 6388 User Manual preview
6388
Brand: Paradyne Pages: 86
Trapeze Networks Indoor Mobility Point MP-371 Installation Manual preview
Indoor Mobility Point MP-371
Brand: Trapeze Networks Pages: 57
H3C WA2200 Series Configuration Manual preview
WA2200 Series
Brand: H3C Pages: 41
LogoWave LigoPTP 5-23 UNITY Quick Installation Manual preview
LigoPTP 5-23 UNITY
Brand: LogoWave Pages: 14
Grandstream Networks GWN7664LR Quick Installation Manual preview
GWN7664LR
Brand: Grandstream Networks Pages: 12
NETGEAR AirCard 797 Manual preview
AirCard 797
Brand: NETGEAR Pages: 4
Linksys AC900 User Manual preview
AC900
Brand: Linksys Pages: 124
D-Link DSL-2730R Quick Installation Manual preview
DSL-2730R
Brand: D-Link Pages: 16
D-Link DSL Series Configuration Manual preview
DSL Series
Brand: D-Link Pages: 10
D-Link DIR-905L Quick Installation Manual preview
DIR-905L
Brand: D-Link Pages: 32
D-Link dlinkgo GO-RTW-N300 Brochure & Specs preview
dlinkgo GO-RTW-N300
Brand: D-Link Pages: 3
D-Link DSR-1000AC Quick Installation Manual preview
DSR-1000AC
Brand: D-Link Pages: 72
D-Link DIR-900L Quick Installation Manual preview
DIR-900L
Brand: D-Link Pages: 32
D-Link DIR-LX1870 Quick Installation Manual preview
DIR-LX1870
Brand: D-Link Pages: 2
D-Link DSL-2740R User Manual preview
DSL-2740R
Brand: D-Link Pages: 73
D-Link DPG-2100 - Wireless Presentation Gateway Quick Installation Manual preview
DPG-2100 - Wireless Presentation Gateway
Brand: D-Link Pages: 12
D-Link DSL 2640B Setup Manual preview
DSL 2640B
Brand: D-Link Pages: 4

Brands by name

Popular brands

Load more brands