background image

8

9

SAFET

Y INFORM

ATION

FIRST

 AID

  C A U T I O N

To reduce the risk of injury

When working with lead acid batteries, always make sure immediate 

assistance is available in case of accident or emergency.
Always have protective eyewear when using this product: contact with 

battery acid may cause blindness and/or severe burns. Be aware of first aid 

procedures in case of accidental contact with battery acid.
Have plenty of fresh water and soap nearby in case battery acid contacts 

skin.

• 

Skin:

 If battery acid comes in contact with skin, rinse immediately with 

water, then wash thoroughly with soap and water. If redness, pain, or 

irritation occurs, seek immediate medical attention.

• 

Eyes: 

If battery acid comes in contact with eyes, flush eyes immediately, for 

a minimum of 15 minutes and seek immediate medical attention.

• 

LCD liquid crystal display: 

If liquid crystal comes in contact with your 

skin: Wash area off completely with plenty of water. Remove contaminated 

clothing. If liquid crystal gets into your eye: Flush the affected eye with 

clean water and then seek medical attention. If liquid crystal is swallowed: 

Flush your mouth thoroughly with water. Drink large quantities of water 

and induce vomiting. Then seek medical attention.

damage that may shorten the unit’s working life, protect it from direct 

sunlight, direct heat and/or moisture.

• 

All ON/OFF switches should be in the OFF position when the unit is 

charging or not in use. Make sure all switches are in the OFF position 

before connecting to a power source or load.

Specific Safety Instructions for the USB Ports

  C A U T I O N

To reduce the risk of property damage

• 

Do not insert foreign objects into the unit’s USB outlets.

• 

Do not attach USB hubs or more than one personal electronic device to 

each USB Port.

• 

Do not use this unit to operate appliances that require more than 3.1A (5V) 

to operate from each of the USB Ports. 

• 

Some household USB-powered electronics will not operate with this unit.

Specific Safety Instructions for Compressors

  W A R N I N G

Specific instructions regarding the risk of bursting

• 

Bursting articles can cause serious injury.

• 

Carefully follow instructions on articles to be inflated.

• 

Never exceed the recommended pressure listed in instructions on articles 

to be inflated. If no pressure is given, contact article manufacturer before 

inflating. 

• 

Monitor the pressure at all times on the LCD screen.

  C A U T I O N

To reduce the risk of injury or property damage

• 

Never leave the compressor unattended while in use.

• 

Do not operate compressor continuously for longer than approximately 

10 minutes, depending on ambient temperatures, as it may overheat. This 

could damage the compressor. Follow the instructions in the “Portable 

Compressor” section.

SAFETY INFORMATION 

(cont’d)

FIRST AID

J7C09ME_11-1913_EN_082418.indd   8-9

8/24/2018   11:15:43 AM

Summary of Contents for Eliminator 11-1913-6


















Reviews: