background image

4

SAFET

Y INFORM

ATION

The following conventions are used in this guide: 

  W A R N I N G

Warnings identify conditions that could result in damage to the product or 

to other equipment. 

 

  C A U T I O N

Cautions identify conditions or practices that could result in damage to the 

product or to other equipment.

Important

These notes describe an important action item or an item that you must 

pay attention to.

NOTE

These notes describe additional information which may add to your  

understanding of how to use the product.

GENERAL SAFETY WARNINGS AND INSTRUCTIONS

  W A R N I N G

 

General instructions pertaining to a risk of fire, electric shock,  

burst hazard, or injury to persons or property

• 

 Avoid dangerous environments.

 Do not use appliances in damp or wet 

locations. Do not use appliances in the rain.

• 

Keep children away.

 All visitors should be kept at a distance from  

work area.

• 

 Dress  properly. 

Do not wear loose clothing or jewellery. They can be 

caught in moving parts. Rubber gloves and substantial, non-skid footwear 

are recommended when working outdoors. Wear protective hair covering 

to contain long hair.

• 

 Use safety glasses and other safety equipment. 

Use safety goggles 

or safety glasses with side shields, complying with applicable safety 

standards. Safety glasses or the like are available at extra cost from your  

local dealer.

• 

 Store idle appliance indoors.

 When not in use, appliances should be 

stored indoors in a dry, high, or locked-up place – out of reach of children.

SAFETY INFORMATION

5

SAFET

Y INFORM

ATION

• 

Do not abuse cord. 

Never carry appliance by cord or yank it to  

disconnect from receptacle. Keep cord from heat, oil, and sharp edges.

• 

Disconnect appliances. 

Disconnect the appliance from the power supply 

when not in use, before servicing, and when changing accessories.

• 

 Ground Fault Circuit Interrupter (GFCI)

 protection should be provided 

on the circuits or outlets to be used. Receptacles with built in GFCI 

protection are available and may be used for this measure of safety.

• 

Use of accessories and attachments. 

The use of any accessory or 

attachment not recommended for use with this appliance could be 

hazardous. Refer to the accessory section of this manual for further details.

• 

 Stay  alert. 

Watch what you are doing. Use common sense. Do not operate 

appliance when you are tired.

• 

Check for damaged parts.

 A part that is damaged should be properly 

repaired or replaced by an authorized service centre before further use 

unless otherwise indicated elsewhere in this instruction manual. Have 

defective switches replaced by authorized service centre. Do not use tool if 

switch does not turn it on and off.

• 

Do not operate this appliance near flammable liquids or in gaseous or 

explosive atmospheres. 

Motors in these tools often spark and the sparks 

might ignite fumes.

• 

Do not expose to extreme heat or flames.

• 

Never immerse the unit in water

 or any other liquid, or use when wet.

• 

NEVER ATTEMPT TO USE THE AC AND DC CHARGING METHODS AT 

THE SAME TIME.

• 

NEVER 

connect this unit to a positive grounded vehicle using the 12 V DC 

Charging Adaptor.

• 

The 12 V DC Charging Adaptor must only be connected to batteries with 

a nominal output voltage of 12 volts. The unit will not operate from a 6 V 

battery and will sustain permanent damage if connected to a 24 V battery.

Specific Safety Instructions for Jump Starters

  W A R N I N G

Specific instructions pertaining to a risk of burst hazard or  

explosive gases

• 

DO NOT

 use the unit for charging dry-cell batteries that are commonly 

used with home appliances. These batteries may burst and cause injury 

to persons and damage property. Use the unit for charging/boosting a 

lead-acid battery only. It is not intended to supply power to a low-voltage 

electrical system other than in a starter-motor application.

SAFETY INFORMATION 

(cont’d)

J7C09ME_11-1913_EN_082418.indd   4-5

8/24/2018   11:15:43 AM

Summary of Contents for Eliminator 11-1913-6


















Reviews: