9.3 Notes on Grease Replenishment/Exchange Procedures
9-16
HW0484074
HW0484074
6. Inject grease into the grease inlet 2 using a grease gun.
7. Remove the grease zerk A-MT6 x 1 from the grease inlet 2, and reinstall the screw M6.
Apply Three Bond 1206C to the thread part of the screw, and tighten the screw with a
tightening torque of 6 N
N
m (0.6 kgf
N
m).
8. Reinstall the hexagon socket set screw on the exhaust port. Apply Three Bond 1206C
to the thread part of the set screw, and tighten the set screw with a tightening torque of
2.9 N
N
m (0.29 kgf
N
m).
Grease type: Alvania EP Grease 2
Amount of grease: 5 cc
The exhaust port is used only for air flow; the grease is not exhausted from the exhaust
port. Do not inject excessive grease into the grease inlet.
NOTE
54/59
