Chapter 3
Caring for your CL910
Caring for the display 59
Caring for the display
Follow these suggestions to keep your display clean:
•
Clean fingerprints and smudges from the display surface by wiping it with the display
cloth provided.
•
If needed, use a
cleaning solution recommended by Motion Computing
to clean the
display. Spray the solution on a cloth then wipe the display. Never spray directly onto the
display surface and never use an abrasive cleaner.
•
If liquid is spilled on the display, wipe it up immediately with a soft cloth like the one
provided with the tablet.
•
Use only the CL910 pen or your finger to write on the display. Any other object could
damage the display surface.
•
Use a case when transporting the Tablet PC to protect the display surface.
•
Cover the display with a protective display film.
•
Avoid exposing the display to direct sunlight for long periods of time.
You can purchase protective display films and CL910 cases from the
Motion Computing
Accessories
page.
Cleaning solutions
Motion Computing maintains a
list of tested cleaning solutions
and chemical disinfectants
on its website.
WARNING:
Do not use any corrosive or abrasive cleaners to clean or disinfect the tablet.
Caring for the pen
If you use a pen with your tablet:
•
Store the pen in the pen storage drawer, tip down, or in a case when not in use.
•
Avoid storing the pen vertically on its tip (when not in the storage drawer). It can
damage the pen-to-digitizer function.
•
Keep the pen away from any liquid because the pen contains electronic components
that could be damaged when wet.
•
In certain environments, particles or debris can stick to the pen tip or the Tablet PC
display. Make sure you wipe off the pen with a soft cloth to avoid scratching the display.
•
Under normal conditions, the CL-Series pen tip should not require replacement.
However, extra pen tips are available if you want to replace one.
N
OTE
:
To order CL-Series pens or new CL-Series pen tips, go to
Motion Computing Accessories
.
