Chapter 2
Using your CL910
Using Motion QuickNav 30
Accessing Motion QuickNav help
For more details on using Motion QuickNav, view Motion QuickNav help.
To view Motion QuickNav help:
1. From the Windows® notification area, tap and hold the Motion QuickNav icon
.
2. Tap
Help
.
Setting Motion QuickNav options
You can change some Motion QuickNav settings from the navigation area. Tap and hold the
Motion QuickNav icon
to open the Options menu. For information on these options, see
Motion QuickNav help.
Using the Motion QuickNav tools
This section provides a brief introduction to the tools available with Motion QuickNav. The
next section describes how to use Motion QuickNav to operate the photo camera in greater
detail.
To use the barcode scanner from Motion QuickNav:
1. Open the
Motion QuickNav toolbar
then tap the barcode icon
to open the barcode
scanner.
2. Tap the Options icon
to set up the scanner. You can choose to:
•
Set the type of barcode the scanner recognizes. For best performance, disable the
codes you do not need.
•
Use the front- or rear-facing camera to scan the codes.
•
Change the resolution. Use a higher the resolution to improve accuracy; use a lower
resolution to improve performance.
N
OTE
:
Motion QuickNav does not support PDF417 barcodes.
To use the Motion QuickNav voice recorder:
1. Open the
Motion QuickNav toolbar
then tap the voice recorder icon
.
2. You can choose to:
•
Send a voice message by email.
•
Create a voice journal and add voice messages to it.
•
Add a voice note to an active application.
3. Tap the Options icon
to set up the device to use for recording or playback or to
change the location of your voice journal.
