Mortara Quinton CR60, User Manual

Page: 59 / 62

CONTROLS, DISPLAYS, INDICATORS
51
Time Limit Control
The time limit control lets you set a maximum time for treadmill use, ranging from 7 to 96 minutes. When the time
limit is activated, the treadmill runs for the time entered by the user, then automatically slows to minimum speed.
The speed and grade controls remain inoperative until you press the
Stop Belt key. To limit the exercise time, use
the following procedure:
1.
Simultaneously press and release Stop Belt , Cool Down , and Select .
2.
Use the + or - keys to increase or decrease the time to the desired limit. Use
Clear
to set the limit automatically
to 30 minutes.
3. Press
Select
.
To deactivate the time limit control:
1.
Simultaneously press and release
Stop Belt , Cool Down
, and
Select
.
2.
Press + to set the time to 96.
3. Press
Select
.
Speed Limit Control
You can set a maximum speed for treadmill use, which is especially useful for unmonitored treadmills. Use the
following procedure to limit the speed:
1.
Simultaneously press and release
Stop Belt , Cool Down
, and
Select.
2.
Use the Faster and Slower keys to set the speed to the desired limit.
3. Press
Select
.
To deactivate the speed limit:
1.
Simultaneously press and release
Stop Belt , Cool Down
, and
Select.
2.
Use the Faster key to set the speed to the highest level.
3. Press
Select
.
Units Default Setting
To change the default setting for the Units command:
1.
Be sure the
Power
key on the controller is off.
2.
Press and hold the Units key.
3. While pressing
Units
, press
Power
. Release the
Power
key but continue pressing
Units
until the self test is
finished.