Mortara Quinton CR60, User Manual

Page: 58 / 62

CONTROLS, DISPLAYS, INDICATORS
50
Clear
The
Clear
key erases the elapsed time, distance, and calories readings, displays the default weight, and resets the
timer to zero.
Select
The
Select
key serves two functions:

It is used when entering the user’s weight and exercise time.

It is used to choose which exercise parameter to display in the center display:
-
Time
: time elapsed since the exercise or count-down timer began.
- Distance : distance elapsed in miles or km.
- Pace : pace of the exerciser (min/mi or min/km).
-
Calories
: total number of calories burned during the exercise.
- Calories/min : number of calories burned each minute at the current speed and grade settings.
- METS : metabolic units (work expenditure).
-
Scan
: time, distance, pace, calories, calories/min, and METS displayed sequentially for three seconds
each.
Cool Down
The
Cool Down key automatically slows the treadmill to minimum speed and zero grade so that the exerciser can
cool down before stopping. It is not necessary to use Cool Down mode before pressing Stop Belt .
Stop Belt
The
Stop Belt keys stop the walking belt. There are two Stop Belt keys on the controller, positioned on each side
for the convenience of both left- and right-handed users. The two keys function identically and you can use either
one at any time during the exercise.
5-Minute Auto Reset
If you do not use the treadmill within five minutes after entering the weight and exercise time, or within five minutes
after pressing
Stop Belt , the controller automatically resets and prompts the user to enter the weight.
Limited Access Control
The limited-access control restricts access to the treadmill controls. To operate the treadmill when the limited-access
control is activated, you must place a magnetic key, supplied with the treadmill, over the magnet logo on the front of
the controller. To activate the control, place the magnetic key over the logo. To deactivate the control:
1.
Remove the magnet. Be sure the controller power is off.
2. Press and hold the + , - , and Power keys until the 8s on the display go off, then release the keys.