21
1.1 Unpacking the stove
2B Standard: After removing the outer packaging, flatten it
and lay onto the floor close to the stove; this can then act as
protective work surface during the assembly process. Next,
remove the legs and bolts from inside the stove. Gently lay
the stove onto its back and unscrew it from the wooden pal-
let. Using the bolts supplied, now screw the legs into position
on the underside of the base. The stove should now be lifted
and moved into the upright position, avoiding excess load on
the back legs. Do not use the bolts used for securing the fire
chamber to the wooden pallet.
Positioning the Baffle
Locate the front access baffle (1) as per drawing and careful-
ly place the insulation pad (2) above the cast baffle assembly.
Before lighting the stove it is important to ensure the cor-
rect location of the front baffle and that the insulation pad
covers the entire baffle assembly.
1.0 Installing your Morsø stove
