28
DK ENG
5. Refuelling of your stove should be done while there are
still glowing embers in the bed. Spread the embers across
the bottom, but concentrated mostly towards the front of
the stove.
6. Place three pieces of fuel weighing roughly 1 kg and meas-
uring about 36-38 cm in length across the embers in one lay-
er, with spacing of roughly 1 cm between the pieces of wood.
7. When the air supply is opened all the way and the door
is closed, the new fuel will ignite in a few minutes.
8. Once the new fuel has taken, adjust the air amount to
the desired setting; optimal combustion will continue until
glowing charcoals are produced.
Make sure that there is always enough air (oxygen) to main-
tain clear, lasting flames when, and after, reducing the amount
of combustion air.
Under normal chimney draft conditions, expect to refuel
your stove every 50 - 60 minutes.
9. A new charge of wood can be added by repeating steps
5 & 6.
Important!
It is important that the fresh quantity of wood starts
to burn quickly. To ensure the fuel lights quickly, open
the combustion air to max. or leave the door ajar to
allow in the amount of air needed to light the wood.
If, however, the wood only smoulders, there will be a
strong build-up of smoke, which at worst can cause
an explosive ignition of the flue gases with the risk
of material damage and personal injury.
