Morgana Plockmatic BM 60, Service Manual

Page: 9 / 37

8
Purpose
The side guides needs to have the correct position in order to transport the set
straight to the fold stop.
Switch off the main power switch and disconnect the power cord.
Remove Infeed cover, according to CRI 2.2.
Empty Stapler magazines.
Move Fold knife to top position by turning the shaft on rear side of fold knife
manually.
Tighten the Side guides in the outer most position and insert tool A.
Move tool A until the Side guide’s inner point is flush to tool.
1.
2.
3.
4.
5.
6.
Adjustment
Loosen screws holding Side guides and adjust so that the guides are parallel to
tool. 1.
REP 3.2 ADJUSTMENT OF SIDE GUIDES BM 60
Tool A
VIEW FROM TOP SIDE
0.25-0.50 mm
Adjust on these screws
Side guide flush to tool
Fold knife
0.25-0.50 mm