Morgana Plockmatic BM 60, Service Manual

Page: 35 / 37

34
CHECK POINT INSTRUCTION REFER-
ENCE
80 000 160 000 240 000
Side guide
parallelism Check that the side guides
are parallel according to
REP 3.2 or 3.3. Check/
Adjust Check/
Adjust Check/
Adjust
Booklet quality Check the booklet quality
and adjust according to
REP 3.5 - 3.9. Check/
Adjust Check/
Adjust Check/
Adjust
Infeed wheel Use a rubber reactivator
alcohol fluid. Check for wear.
If worn replace.
Page 25
Item 8 Clean Clean Check/
Replace
Plastic guide
included in
Back jogger Apply grease between the
oblong hole and the metal
pivot pin (4x). Page 25
Item 5 Check Grease Check
Back jogger
adjustment
bracket. Apply a thin layer of silicon
grease between the Rear
jogger bracket and the
bottom frame. Page 25
Item 3 Check Grease Check
INFEED MODULE BM 61
FINAL CHECK POINTS
CHECK POINT INSTRUCTION REFER-
ENCE
80 000 160 000 240 000
Bushing on
Upper fold
rollers. Under the top cover, use
grease between the bushing
and shaft. Apply grease
between bushings and side
frame. Replace at 160 000. Page 15
Item 6 Grease Grease Grease
Fold knife
guides (2 pcs.) Apply grease on vertical rods. Page 14
Item 1
Grease
Side jogger
movement
(Only BM 61) Inside the infeed cover, apply
grease on screw between
jogger linkage and lower
stapler bracket. Page 14
Item 6 Grease Grease Grease
V-belt on Belt
stacker motor. Check for wear. If worn
replace. Page 1.24
Item 4 Check Check Check/
Replace
Transport belts
on Belt stacker. Use a rubber reactivator
alcohol fluid. Check for wear.
If worn replace.
Page 17
Item 2 Clean Clean Replace