Morgana MB300 XL Pro Operator'S Manual Download Page 13

Page: 13 / 84

MB300 XL Pro

rev.0.2 ID03570

2. TRANSPORT

CAUTION!

For no reason the staff is authorized to pass under a suspended load

during transport or in the vicinity of it.

CAUTION!

The transport phase will have to be carried out by trained competent

and authorized personnel, equipped with the necessary personal safety
protections.

The binder must be moved by means of a forklift. It can only be lifted by forking the two long sides,

front and rear side.

The front of the frame includes channels to insert the forks. (see bottom image).

The machine can only be moved having removed the output belt.

For the final positioning or for small movements a trans-pallet can be used.

IMPORTANT

Tools for clamping and lifting are not provided.

b) The disposal of packaging materials is at the recipient’s care and must be performed in

accordance with the laws in the country where it will be carried out.

Remove dust and external dirt accumulated during the transport phases.

988 for fork lift

164

654 for trans pallet

Materiale di partenza:

QUOTE LINEARI E ANGOLARI

SECONDO ISO 2768 mK

4/4

ASS

A0100001-10

Raccanello

14-11-2016

Massariolo

14-11-2016

Massariolo

Dimensione:

1:7.5

DIGIBOOK 300 REL.10

IL PRESENTE DISEGNO E' DI PROPRIETA' DELLA "K.G.S." NON PUO' ESSERE RIPRODOTTO NE' TRASMESSO A TERZI SENZA APPROVAZIONE SCRITTA

THIS DRAWING MUST NOT BE REPRODUCED WITHOUT OUR WRITEN CONSENT

Peso:

MATERIALE : -

K.G.S.

Srl

±2

±1.2

±0.8

±0.5

±0.3

±0.2

oltre 2000 a 4000

oltre 1000 a 2000

oltre 400 a 1000

oltre 120 a 400

oltre 30 a 120

oltre 6 a 30

METRIC

Foglio

Nr / di

Revisione

SolidWorks

Sistema CAD:

Trattamento:

Designazione materiale:

±0.1

PROGETTISTA

DISEGNATORE

Tolleranza

Mestrino

Sito

File: A0100001-10_300 REL.03

VERIFICATORE

TOLLERANZE GENERALI

Spigoli vivi secondo ISO 13715

Superfici : ISO 1302

Getti secondo ISO 8062-CT11
Saldature secondo ISO 13920-BF
Piegature secondo DIN 6935
Stampaggio secondo DIN 6930-m
Filettature secondo ISO 965-2 media

Codice materiale:

Dimensioni

oltre 0,5 a 6

Codice:

Descrizione:

Scala:

Data

Nome

Macchina:

- Kg

Sostituisce il:

Sostituito da:

Verniciato Grigio RAL-9007 Bucciato

Summary of Contents for MB300 XL Pro





















































































Search results

Summary of Contents for MB300 XL Pro

Reviews:

Related manuals for MB300 XL Pro

Brands by name

Popular brands

Morgana MB300 XL Pro, Operator'S Manual

Search results

Summary of Contents for MB300 XL Pro

Reviews:

Related manuals for MB300 XL Pro

Brands by name

Popular brands