Accessing Menus.
Main Menu.
1.
The mains switch on the machine must be off.
2.
Set the
to its mid position and then turn the mains switch on.
3.
The
functions can then be accessed by turning the
clockwise or anti-clockwise as shown.
Set-up Switch
Main Menu
Setting Dial
CrEES
on / oF = crease on or off
FoLd
on / oF = fold on or off
dELrY
on / oF = delivery on or off
SEt
PoS / FoLd = set by position or set by fold
bAt = batch
rG
.00 .00 = roller gap
Sub-menus.
Set-up switch
Setting Dial
To access the sub-menus flick the
to the down position and turn the
clockwise or anti-clockwise.
1 Cr = crease position 1
9 Cr = crease position 9
F1
= fold 1 position
F2
= fold 2 position
rPoS = delivery roller position
Shin = shingle (amount delivery wheel turns)
rESEt = reset
Sub-Menu in Set by
mode (set by position).
PoS
tYPE
L = type of fold i.e. L = letter fold
Len 100 = paper length
PAPEr 3 = type of paper (0= light 3 = heavy)
Cr1
0.0 = crease 1 position
rPoS 150 = delivery roller position
Shin
41 = shingle (amount delivery wheel turns)
Cr2
0.0 = crease 2 position
Sub-Menu in Set by
mode (set by fold)
FoLd
F1
0.0 = fold 1 position
F2
0.0 = fold 2 position
Clockwise
Anti-clockwise
Clockwise
Anti-clockwise
Clockwise
Anti-clockwise
Operating the Digifold
Page 10
CREASING / FOLDING
F_cLr
on / oF = fold blade clear of paper to reduce the possibility of marking or
scratching sensitive paper, on or off
