Manual Part No: 930155-01 MD Electric Fryer
- 13 –
Manual Rev No: 4
Users Instructions
Users Instructions
Users Instructions
Users Instructions (cont.)
Controls
An isolating switch will have been fitted adjacent to the appliance to enable the power to be switched off
when servicing work is being carried out. The isolating switch should also be switched off when the
appliance is not going to be used for a long period, e.g. overnight.
The green neon on the front of the appliance indicates that the isolating switch is turned
ON, and that
the appliance is ready for use.
The thermostat fitted is also an "
ON/OFF" switch, and operates through a temperature range of
90
°
C - 190
°
C. Turning the knob clockwise first switches the appliance "
ON" and further allows
the temperature of the oil to be set. The glowing amber neon indicates when the elements are on and
when it goes out it shows that the desired oil temperature has been reached. Thereafter, the amber neon
and elements will cycle
ON/OFF.
The fryer is fitted with a "Hi-Limit" (Override) Thermostat as a safety measure to prevent the oil
overheating. If for any reason, the "Hi-Limit" thermostat operates, then the electricity supply to
the elements is switched
OFF.
WARNING:
WARNING:
WARNING:
WARNING:
The operation of the "Hi-Limit" thermostat indicates that there is a fault in the equipment
And a competent service engineer should be consulted to rectify the fault and to reset
the “Hi-Limit” thermostat.
Operating Instructions
WARNING:
WARNING:
WARNING:
WARNING: DO NOT OPERATE THE FRYER WHEN THE PAN IS EMPTY
WE RECOMMEND THAT ONLY GOOD QUALITY VEGETABLE OIL IS USED AND NOT SOLID FAT.
1)
Open the compartment door, ensure that the drain valve is fully closed and check that the cooking
oil is up to the level indicated on the pan.
The oil required to fill the pan to the level indicated is:
300 Fryer – 21.4 litres (4.7 gallons)
600 Fryer – 46.9 litres (10.3 gallon)
2)
Turn on the electricity supply at the mains isolator switch, (the green neon will glow indicating
power to the unit).
3)
Switch On the “
ON\OFF switch.
4)
Turn the thermostat knob clockwise to the desired temperature setting. The amber neon will glow
now and the oil will heat up.
