MN00178
1359
Configuration / Network / API- Boujour
NOTE:
To control the EXO Camera system with a VMS software system, you must enable the required Network APIs. Enable PSIA or GENETEC API depending on which VMS
platform you intend to use with the device. Disabling any unrequired APIs will accelerate boot time. Milestone VMS will link through the PSIA API.
•
Note: ONVIF is standard built in and does not require activation. If using ONVIF you do not need to select an API.
•
Set Bonjour discovery protocol settings.
•
Modify SNMP settings to match with any SNMP software you wish to use for monitoring the device.
Configuration / Network / SNMP Configuration
Configuration / Network / RTSP Configuration
Configuration / Network / Multicast
If using Multicast output, Insert Multicast starts IP, and select start port.
