Montesa COTA 301RR 2023, Owner'S Manual

Page: 22 / 180

Operating instructions
1-11 1-11
Mapping switch
The ECU for the Cota 301RR (3ED/4ED) PGM-FI electro-
nic injection system has two operational maps which can
be selected depending on the conditions:
Switch in Mode 1:
Standard
Switch in Mode 2:
Powered
(1) MAPPING SWITCH
(2) MODE 1
(3) MODE 2
Magnetic stop switch
Pull the stop magnetic switch (red) until the engine stops
completely.
(1) MAGNETIC STOP SWITCH
Front brake lever
The front brake lever free play can be adjusted by turning
the adjuster.
Free play must be adjusted to provide 0.5 – 1.5 mm
(0.019 – 0.060 in) clearance between the end of the ad-
juster and the front brake master cylinder piston.
y
To reduce free play, turn the adjuster clockwise, then
tighten the lock nut securely.
y
To increase free play, turn the adjuster counterclockwi-
se, then tighten the lock nut securely.
If brake lever feels soft or spongy, there is probably air in
the brake system and it must be bled.
NOTICE
Do not adjust the end of the adjuster and the front brake
master cylinder piston below 0.5 mm (0.019 in).
(1) ADJUSTER
(2) LOCK NUT
1
3
2
1
2
1
3ED/4ED 3ED/4ED ED/2ED ED/2ED
3ED/4ED 3ED/4ED
1