Montesa COTA 301RR 2023, Owner'S Manual

Page: 17 / 180

Operating instructions
1-6 1-6
3. Clock settings
The clock will be displayed in 24h format if the unit of
measure is set to km .
The clock will be displayed in 12h format if the unit of
measure is set to mi .
1. Start the motorcycle.
2. Press the (MODE) + (SET) buttons.
– Press and hold more than 2 seconds. The clock will
be set in the adjust mode with the hour display flas-
hing.
– Press the (MODE) button to change the hours.
y
Press less than 2 seconds, the digit will increase
by one hour each time the button is pressed.
y
Keep the button pressed, the hour digit advances
fast, release the button when the desired time is
displayed.
- Press the (SET) button to change the minutes.
y
Press less than 2 seconds, the digit will increase
by one minute each time the button is pressed.
y
Keep the button pressed, the minute digit advan-
ces fast. Release the button when the desired
minute is displayed.
3. Press the (MODE) + (SET) buttons.
– Press and hold more than 10 seconds to save the
new values and exit the clock setting mode.
– If no button is pressed for more than 10 seconds,
the clock setting mode will end without saving the
changes.
2. Changing from “TOTAL”, “Trip A” o “Trip B”.
1. Start the motorcycle.
The “TOTAL” distance is displayed by default.
2. Press the (MODE) button.
– Press less than 2 seconds to display “TOTAL”,
“TRIP A” o “TRIP B”.
3. Press the (SET) button.
– Press less than 2 seconds to display the ride time
(hour) or accumulated mileage (km / mi).
To reset “TRIP A” or “TRIP B”, select the desired condi-
tion (accumulated mileage or ride time). Press and hold
the (SET) button for more than 2 seconds.
24h 12h
ED/2ED ED/2ED ED/2ED ED/2ED ED/2ED ED/2ED