Montesa COTA 301RR 2023, Owner'S Manual

Page: 16 / 180

Operating instructions
1-5 1-5
(1) SIDE STAND
(2) SIDE STAND SPRINGS
Inspection
1. Check the stand springs for damage or loss of tension.
2. Check the side stand assembly for freedom of
movement.
If the stand is stiff or squeaks, clean the area around
the pivot and lubricate the pivot bolt with grease or oil
lubricant.
NOTICE
Do not start the motorcycle while supported on the side
stand, which could be bent.
Setting mode
The main screen is used to adjust the following settings:
1. Changing the speed units:
1. Start the motorcycle.
2. Press the (SET) button.
– Press less than 2 seconds to display the ride time
(hour) or mileage (km / mi).
– Press and hold more than 10 seconds, the speed
units will change from km/h to mph and vice versa,
depending on their initial setting.
(1) SPEEDOMETER
(2) ODOMETER
(3) CLOCK
(4) RIDE TIME
(5) TURN SIGNAL INDICATOR
(6) HIGH BEAM INDICATOR
(7) MALFUNCTION INDICATOR LAMP (MIL)
Odometer/Speedometer (ED/2ED)
Instruments
y
Speedometer: Shows riding speed. This shows your
speed in kilometres per hour (km/h) or miles per hour
(mph).
y
Odometer: shows accumulated mileage in “TOTAL”,
“TRIP A” and “TRIP B” modes.
y
Clock: Shows hour and minute.
y
Ride time: shows the ride time in “TOTAL”, “TRIP A”
and “TRIP B” modes.
Indicators
The indicators are located in the speedometer.
y
High beam indicator (blue): Lights when the headlight
is on high beam
y
Turn signal indicator (green): Flashes when the turn
signal operates.
y
Malfunction indicator lamp (MIL). When any abnorma-
lity occurs in the system, the ECM turns on the MIL.
(1) (MODE) BUTTON
(2) (SET) BUTTON
1
3
2
5
6
7
1
2
4
2
1
ED/2ED ED/2ED ED/2ED ED/2ED
ED/2ED ED/2ED