Montesa COTA 301RR 2023, Owner'S Manual

Page: 166 / 180

6-11 6-11
Electrical servicing
Fan motor relay inspection
Remove the fan motor relay.
Connect the ohmmeter to the fan motor relay connector
terminals.
Connection: Red – Blue
Connect the 12 V battery to the following fan motor relay
terminals.
Connection: Red – Black/Blue
There should be continuity only when the 12 V battery is
connected.
If there is no continuity when the 12 V battery is
connected, replace the fan motor relay.
(1) FAN MOTOR RELAY
Cooling fan system inspection
Fan motor inspection
Remove the fuel tank.
Disconnect the fan motor 2P (Natural) connector.
Directly connect the 12 V battery to the fan motor 2P
(Natural) connector terminals of the fan motor side.
The fan motor is correct when the fan motor operate
when the 12 V battery is connected.
If the fan motor does not operate, replace the fan motor
assembly.
(1) 2P (NATURAL) CONNECTOR
Magnetic engine stop switch inspection
Disconnect the magnetic engine stop switch connectors.
Check the magnetic engine stop switch for continuity.
There should be continuity when the magnetic switch top
part (magnet) is removed.
Replace the switch if it is out of specification.
(1) MAGNETIC ENGINE STOP SWITCH
(2) CONNECTORS
2
1
1
1