Monmouth Scientific Cleanroom Kit 4M, Installation Manual

Page: 46 / 72

Issue 03 – June 2018 46
11. 12.
Add the (optional) lights to the desired positions
and plug into the distribution block and then
connect to the CAM unit.
Add in the ceiling tiles to all areas with support
extrusions.
Fit end caps to the visible ends of the
reinforced ceiling members .
13.
Mount the door rail(s) and door(s) to the room and fit the door rail cover(s) .
After calibration/set up of the CAM units, the room is then complete.
Prior to use as a cleanroom, all surfaces must be cleaned in accordance with the requirements of
your application.
The room may now be validated if required prior to any usage. For UK based installations,
Monmouth Scientific will be happy to quote for validation if not already selected. If you have already
selected validation please contact us on 01278 458090 to arrange a convenient date.