Monmouth Scientific Cleanroom Kit 4M, Installation Manual

Page: 42 / 72

Issue 03 – June 2018 42
1
.
Start in a corner without a door. Add the lower bar on each side of the corner post to give
immediate stability to the structure.
2
.
Start adding to the first two panels evenly and
build up the corner panels to ensure and
maximise stability in the structure from the start.
Do not forget to add the vertical 8mm to 6mm
plastic reducer strips either side of a panel. It
is advisable to add these as you go and not to fit
in advance.
3
.
It is important that the slots at the top of the
double faced profiles used in the mid wall
sections, and the slots on the top bars are
facing inwards. This will allow the ceiling bars to
join to the main structure.