Moneris Mobile 8100 Operating Manual Download Page 26

Page: 26 / 86

Operating Your Terminal

Moneris Mobile 8100 Merchant Operating Manual v1.01

4.7.2: Pre-Auth Menu

To access the Pre-Auth menu from the idle prompt:

•

Press the

key.

The Pre-Auth menu screen appears...

•

Press the

key to initiate a Pre-Authorization (PAUTH) transaction. (See

section

7.5: Pre-Authorization

for further instructions.)

•

Press the

key.to initiate an Advice (ADV) transaction. (See section

7.6:

Pre-Authorization Completion (Advice) from the SAME BATCH

and

7.7: Pre-

Authorization Completion (Advice) from a PREVIOUS BATCH

for further

instructions.)

•

Press the

key to display the Correction menu.

4.7.3: Correction Menu

To access the Correction menu:

•

Press the

key.

The Correction menu screen appears...

•

Press the

key to initiate a Purchase Correction (PCOR) transaction. See

section

7.2: Purchase Correction

for credit transactions and

8.2: Purchase

Correction

for debit transactions.

•

Press the

key.to initiate a Refund Correction (RCOR) transaction. See sec-

tion

7.4: Refund Correction

for credit transactions and

8.4: Refund Correction

for debit transactions.

•

Press the

key to return to the idle prompt.

4.8: Correcting Data Entry Errors

If you make an error while entering data on the keypad, press the

CORR

key to

erase the information one character at a time and then re-enter it. To delete the
complete entry and return to the previous data entry field, press the

CAN

key.

SWIPE CARD OR

PAUTH ADV OTHR

F1 F2 F3

SWIPE CARD OR

PCOR RCOR OTHR

F1 F2 F3

Summary of Contents for Mobile 8100























































































Search results

Summary of Contents for Mobile 8100

Reviews:

Related manuals for Mobile 8100

Brands by name

Popular brands

Moneris Mobile 8100, Operating Manual

Search results

Summary of Contents for Mobile 8100

Reviews:

Related manuals for Mobile 8100

Brands by name

Popular brands