Moneris Mobile 8100 Operating Manual Download Page 15 | Manualshive

Page: 15 / 86

background image

Moneris Mobile 8100 Merchant Operating Manual v1.01

9

About Your Terminal

2.1.9: Charging Base

Figure 2.2: The

Mobile 8100

Charging Base

The battery charging base has a green LED that lights up when the battery is on
the base and being charged.

See

section

1.4: Setting Up the Slow Charging Base

for instructions on setting up

the slow charging base and section

4.1: Charging the Battery

for instructions on

using it.

There are two charging bases available for the

Mobile 8100

:

•

Slow charging base

•

Vehicle charging base

Slow Charging Base

This base takes approximately 16 hours to fully charge the

Mobile 8100

battery,

however it can be used to maintain the charge of the battery in between processing
transactions. It receives power from a regular wall jack using the power adaptor
provided.

Vehicle Charging Base

This is also a slow charging base, however this base must receive power from a
12VDC vehicle battery (i.e. hardwired into the vehicle’s battery) or through a cig-
arette lighter power adaptor.

2.1.10: Power Adaptor

The power adapter is used to provide power to the Slow Charging Base.

Use only the power adaptor supplied with your

Mobile 8100

charging base.

Many adaptors look similar and will connect to the

Mobile 8100

charging base,

but will not work properly. The wrong adaptor can cause unpredictable behaviour,
poor charging and possibly damage to the base, battery and terminal.

«
...
13
14
15
16
17
...
»

Summary of Contents for Mobile 8100























































































Reviews:

No comments

Related manuals for Mobile 8100

Brand: Quintex Pages: 54

Brand: Magtek Pages: 26

Brand: Magtek Pages: 35

Brand: Olympus Pages: 34

Brand: Axesstel Pages: 16

Brand: National Instruments Pages: 7

AKI-CDC-MOD-15T

Brand: Kollmorgen Pages: 36

Brand: National Instruments Pages: 20

Brand: AEQ Pages: 2

Brand: NCR Pages: 306

Brand: National Instruments Pages: 12

Brand: Nexcom Pages: 45

Brand: ESA Pages: 6

Brand: Häfele Pages: 112

Brand: Pundi X Pages: 19

Brand: POSline Pages: 69

Brand: Sam4s Pages: 64

Brand: ParTech Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands