Mondolfo Ferro TBE160 TERRA, Operator'S Manual

Page: 78 / 244

78 - E
nGlISH
- Operator's manual
TROUBLE SHOOTING
t
he MaChine doeS not Start
No current
➥
Provide power
The overload cut motor protector(s) is(are) not active
➥
Activate the overload cut motor protector(s)
Transformer fuse broken
➥
Replace the fuse
o
il leak
u
nion looSe
➥
Tighten the union
Pipe cracked
➥
Replace the pipe
a
Control reMainS aCtivated
Switch broken
➥
Clean or replace the switch
Solenoid valve stuck
➥
Clean or replace the solenoid valve
t
urntable Cylinder preSSure drop
The distributor leaks
➥
Replace the distributor
Gaskets worn
➥
Replace the gaskets
e
xCeSS trolley ClearanCe
Contact technical service to adjust the
sliding blocks
l
oSS oF poWer in turntable rotation
Loose belt
➥
Tighten the belt
M
otor StopS during uSe
Overload cut motor protector activated
➥
Open the electric system box, then
reactivate the overload cut motor
protector by turning the grey bar (A,
Fig. 38); at the end, reclose the electric
system box.
t
he MaChine doeS not Move
Current does not arrive to the solenoid valve
➥
Check the electric connection to the
solenoid valve
Fig. 38
a