Mondolfo Ferro TBE160 TERRA, Operator'S Manual

Page: 69 / 244

- E
nGlISH
- Operator's manual 69
maximum battery life, the transmitter
is only activated for the duration of
the control impulse (the green LED on
the radio-control box lights up). If the
transmitter batteries are run down (the
yellow LED on the radio update kit box
lights up) the control unit can be con-
nected to the machine using the original
cable. If the yellow LED lights up, it is
advisable to recharge the batteries with
the battery charger connected to the
230V mains, single-phase, 50/60 Hz.
WHEEL LOCKING
OPERATION
The machine has a high pressure hydraulic
circuit for the movements. The pressure
in this circuit can be adjusted by turning
the handle (A, Fig. 16) as explained in
the table.
Pressure adjustment range from 50 to
180 bar
Normal operating pressure 180 bar
The pressure at which the machine is set
can be checked on the pressure gauge
(C, Fig. 11) by operating the turntable
open control to its end of stroke or by
locking a rim.
NOTE.
When working with light alloy rims,
it is recommended to use the specific
rings supplied upon request (Fig. 17) in
order to prevent scratching or scuffing
the rim. ATTENTION
If the machine malfunctions, retreat to
a safe distance and turn the machine’s
main switch (A, Fig. 11) to 0 (Fig. 18).
Fig. 16
a
b
Fig. 17
Fig. 18