Figure 6 Strobe with External Sensor
10
Monarch offers various types of external
sensors that are compable with the
Nova-
Pro including opcal, laser,
magnec, inducve, etc. ROS
-P shown.
“stop moon”.
The speed read by the external sensor will be
shown in the selected units on the display. The strobe can be
configured to trigger on the posive or negave edge of the
incoming pulse (MENU-MISC).
On-Target icon will show on the display when a valid
external signal is detected.
4.2
LASER Mode
The Laser Mode is only available when the Laser Module is installed.
This mode uses the LASER to trigger the strobe flash and is similar to
the External Input Mode.
Laser icon will blink when Laser Mode is enabled and be
on solid when trigger is pulled and laser is on.
By pulling the trigger and aiming the laser at a reflecve target on
the rotang or reciprocang machine, the strobe will flash each me
a reflecon is received allowing the user to virtually “stop moon”.
On-Target icon will show on the display when target is detected by laser
The flash rate (speed) will be displayed in the selected units.
